|
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
The Collier, aquatint by Robert Havell 1814, showing a Matthew Murray steam locomotive (The Salamanca) on the Middleton Railway
The Middleton Steam Railway is the world's oldest continuously working railway. It was founded in 1758 and is now a heritage railway run by enthusiasts since 1960. The railway operates passenger services at weekends and on public holidays over approximately 1 mile of track between its headquarters at Moor Road, Hunslet, Leeds, West Yorkshire, England and Park Halt on the outskirts of Middleton Park. OriginsThe Middleton Railway was the first railway to be granted powers by Act of Parliament in 1758. It was built to a gauge of 4 ft 1 in (1,245 mm) to carry coal from the Middleton pits owned by Charles Brandling to Leeds (near Meadow Lane, close to the River Aire). Not all the land belonged to Brandling and the Act gave him power to obtain wayleave. Otherwise the line was privately financed and operated, initially as a wagonway using horse-drawn vehicles. Around 1807 the wooden tracks began to be replaced with superior iron edge rails. Introduction of steamImage:Salamanca von John Blenkinsop.jpg
The Salamanca
In 1812 the Middleton Steam Railway became the first commercial railway to successfully use steam locomotives. John Blenkinsop the colliery's viewer, or manager, had decided that an engine light enough not to break the cast iron track would not have sufficient adhesion, bearing in mind the heavy load of coal wagons and the steep track gradient. Accordingly he relaid the track on one side with a toothed rail, which he patented in 1811 (the first rack railway), and approached Matthew Murray of Fenton, Murray and Wood, in Holbeck, to design a locomotive with a pinion which would mesh with it. Murray's design was based on Richard Trevithick's Catch me who can, adapted to use Blenkinsop's rack and pinion system, and was called The Salamanca. This 1812 locomotive was the first to use two cylinders. These drove the pinions through cranks which were at right angles, so that the engine would start wherever it came to rest. The line thus entered the history books, in 1812, for it was first to operate successfully, and with three more locos built later, remained in use for another twenty years. In 1881 the railway was converted to 4 ft 8½ in (1,435 mm) standard gauge. PreservationIn June 1960, the Middleton Steam Railway became the first standard-gauge railway to be taken over and operated by unpaid volunteers. Passenger services were initially only operated for one week, using an ex Swansea and Mumbles Railway double deck carriage. However, the volunteers of the Middleton Railway operated a freight service until 1983. Regular operation of passenger services began in 1969. The Middleton Steam Railway is home to a representative selection of locomotives built in the Jack Lane, Hunslet area by the famous Leeds manufacturers of John Fowler & Co., Hudswell Clarke, Hunslet Engine Company, Kitson & Co. and Manning Wardle. The locomotives include "Sir Berkeley", which was featured in the 1968 BBC TV version of "The Railway Children". The locomotive is owned by the Vintage Carriages Trust of Ingrow near Keighley. Motive Power[1]Operational Steam Locomotives
Steam Locomotives undergoing light work
Steam Locomotives Undergoing Overhaul or Restoration
Stored Steam Locomotives
Operational Diesel Locomotives
Non-Operational Diesel Locomotives
Non-Operational Electric Locomotives
Operational Diesel Railbus
Operational Diesel Inspection Vehicle
ReferencesRansom, P.J.G., (1990) The Victorian Railway and How It Evolved, London: Heinemann External linksWikimedia Commons has media related to:
|
| All Right Reserved © 2007, Designed by Stylish Blog. |